Installing A Door Knob with Certainty Home Inspections

Posted on: May 3, 2011 by in Maintenance/Safety
No Comments

We enter and exit our doors several times every day and it’s typical for the doorknobs to become worn out and require to get exchanged. Take a moment to stop and look at the number of times your doors get closed and opened each day. Most people have the necessary ability to remove and replace the door knobs within their home using a screwdriver and some patience; here is some information about how to help make your doors close and open efficiently.

The type of door knob you may need depending on whether or not they are to be used on an exterior door or an interior door.

Outside doorknobs is going to generally be a heavier duty kind doorknob with a heavy duty lock. If you replace the exterior door knob you are normally have a deadbolt lock that needs to be replaced whenever you change your door lock in order to have matching keys for both locks.

Inside doors use a simple doorknob and are available in two typical sizes; 2-3/8 inches and also 2-3/4 inch. How you can figure out which size the door has would be to measure from the sharp edge of your door to the center of the door knob. If you buy a replacement door knob be sure it will match up with your door size.

To remove the current doorknob use the proper kind of screwdriver and take the two screws out completely. Tug on the knobs from each direction and the door knobs should come a part on either side.

To take out the latch extract the pair of screws on the door edge as well as the face plate as well as latching mechanism will pull out. Now remove the strike plate from the door facing by taking out the 2 screws which have been holding it in position.

Now that you are well prepared to get going with your installation; for those who selected an adjustable doorknob make sure it is set in the appropriate setting.

You need to install the latch 1st; slide it through the small opening ensuring it does not bind up and screw it back into place. Simply somewhat snug your anchoring screws, this tends to let you shift it around a bit to get the knob assembly to work a little more smoothly, you can tighten all of them later on.

Now you have everything prepared to slide the doorknob assembly directly onto place, put the side in first that receives the anchoring screws, the actual spindle will have to go all the way through the latching assembly and as well as fit through the opening accurately.

While you’re holding it just barely rotate the knob back and forth, this allows you realize you have it in the right way.

At this time slide the opposite knob assembly directly into place and begin the screw in correctly. Once more; just sung the screws and make sure the doorknob works freely.

At this point place the strike plate located on the door facing simply by being certain that it fits in the slot accurately and installing the screws.

Slowly and gradually examine the door to make any necessary modifications.

Straightforward work saving tip; Make sure you turn any locking mechanisms along with the latch the proper direction initially, you can certainly insert them in facing the wrong direction, then you will have to re-do your work.

For more information on tips to maintaining your home visit our Home Maintenance & Safety section on our website.  Certainty Home Inspections has three licensed home inspectors serving the Louisville Kentucky area and Southern Indiana area including Jeffersonville, New Albany, Seymour, Bedford,  Sellersburg, Charlestown and Clarksville Indiana.  We provide several services including septic, termite, mold, radon and well water testing.  We also perform Indiana Housing and Rural Development loan inspections.  Call us today to book your next inspection 866-417-9591.

Louisville Home Inspection Certainty LogoCertainty Inspections Louisville Home Inspection Company | Let this experienced home inspector help keep you from buying The Money Pit. We’ll alert you to any and all health or safety issues and maintenance needs of the home you’re looking to buy.

Certainty Inspections  will be your home buying or selling advocate! We are committed to providing you with outstanding service. We’re highly experienced and extremely thorough. If you’re looking to buy or sell in the Louisville area, we can help!

Owned and operated by home inspector and mold inspection specialist, Certainty Inspections, William Troutman prides himself in being committed to following high standards and providing professional service to all of our customers.

Call (502) 257-7401 Today or Click To Schedule Online 24/7 Right From Our Website.

We Want To Help Give You Confidence In Moving Forward On Your Home Buying Decisions!